Dewatering Unit
IDEC-DU2000 series 20ft container chemical dosing equipment is mainly used for mixing of flocculation, coagulation or de-emulsifier. It works together with dewatering centrifuge to separate the ultra-fine solids from the mud or waste water, to get clean water for industry applications; or support the separation of waste sludge.
FEATURES
- Recovered Water from the Dewatering process may be recycled or re‐used for the following:
- Returned direct to the active mud system, as dilution
- Returned to the drill water storage tanks or Rig Cleaning
- Location dust suppression / access road construction
- Treated further to acceptable regulatory discharge standards for release to the environment


SPECIFICATIONS
Container | Pumps and Equipment | Pumps and Equipment |
Bulkhead for pipe connections | 2x3r 118 Series Pump | 10 HP 460Hz 3HP XP Motor |
2” Insulation | 2hp CP67 P.C. Pumps and Belt drives | 460V, 3 Phase XP Motor |
Air Conditioner, 24000 BTU | Thompson Centrifugal Acid Pump | 1/2 hp, 460V, 3 Phase XP Motor |
1/8” Thick Strongwell fiberglass flooring | 1 hp Mixers Doppler Flow Meters | 460 V, 3 phase XP motors |
PIPING
Mud Line piping ‐ 3 Schedule 80 PVC |
Piping for P.C. metering pumps to be 1 1/2 inch sched. 80 PVC with PVC ball valves |
¾” hootnanny |
Suction and discharge piping for centrifugal pump ‐ 3 Sched. 80 PVC |
1” Rotameters for Polymer Pumps |
3/4” Rotameter with needle valve for Acid Pump |
COMPARTMENT TANK
Dimensions | 4’x4’x10’ (1.21mx1.21mx3.04m) |
Capacity | 3 x 330 Gallons |
Material | 304 Stainless Steel |
Agitation | One agitator each |
EFFLUENT TANK
Dimensions | 4’x4’x10’ (1.21mx1.21mx1.21m) |
Capacity | 475 Gallon |
Material | 304 Stainless Steel |
Sump | 4” Carbon Steel |
ELECTRICAL SPECIFICATION
Dimensions | 4’x4’x10’ (1.21mx1.21mx1.21m) |
Capacity | 475 Gallon |
Material | 304 Stainless Steel |
Sump | 4” Carbon Steel |